Support
- Intro
- Inspectors
- Print Industry
- Brand & Print Buyers
- Color Manufacturing
- Design & Photography
- CC Products
- Tests & Audits
- Trainings
- CC-2D Barcode Reader
- RHT wireless datalogger (discontinued)
- RHT USB Sensor/DataLogger
-
CC Measurement Backer
- ChromaChecker Nano
-
Manager or Operator Cloud Interface
-
Troubleshooting CC-2D Barcode Reader
-
CC XY-table
-
CC Capture
- Summary of Standard Color Bars And Applications
- Connect Capture
- Control Strip Library
- Quick Start — CC Capture
- CC Capture Technical Requirements
- CC Capture Features
-
Supported Instruments
- X-Rite i1 Pro
- X-Rite i1 iO
- X-Rite i1 iSis
- X-Rite eXact
- X-Rite eXact2
- Myiro-1
- Techkon SpectroDense
- Calibrate ColorChecker Studio (Xrite i1Studio)
- CC Sphere Portable Spectrophotometer
- Variable Spectro 1 (Bridge)
- Spectro with Bridge
- X-Rite ICPlate2
- NIX Spectro 2
- Veoria DeltaOne and DeltaWeb
- Techkon SpectroPlate
- CC-380 Triple Angles Gloss Meter
- CC-XY Table S
- Introduction to QuickChecker Interface
- CC Capture Print Inspector
- CC Capture and Barcodes
- CC Capture
- CC Capture Substrate Inspector
- CC Capture Color Inspector
- QuickStart — Measure Lighting Condition
- CC Capture Plate Inspector
- No Instrument Color Grid
- Troubleshooting CC Capture
- 3rd party devices
- CC Capture download
- Trial vs. Registered Version
- Instruments Inspector Targets
-
Substrate Inspector B&W Backer
- E-Factor Exercise/Sampler
- CC Uploader
-
CC Connect
October 4, 2022
Techkon SpectroDense
- Modes: Spot, Scan (2nd and 3rd generation)
- M-Condition supported: M0, M1, M2, M3
- Inspectors: Print, Instrument, soon: Color, Substrate.
Features & unique benefits:
- Any Start/ End in a scan mode — The user may start from the first patch or before first, and on the last or on after the last patch.
- Any Scanning direction in a scan mode — no matter which direction the Operator prefer - any time any row scanning direction doesn’t have an influence on readings
- Bar-code support for Scanning Template selection and Job Description.
- Multi M-condition measurements in Spot mode - Single click on the measure button will execute a series of readings. This feature is very useful for :
• creating Color Libraries/Pallets that creates universal color sample definition
• substrate measurements where OBA indication require multi M-condition evaluation - CC Capture is the only software where the control strip can mix various color spaces (C<YK, RGB, HiFi, ECG, Lab, Spot), and also special patches can be defined (Slurring/Doubling, DUD, etc)
Recommendations:
- Track your instrument with Instrument InspectorT-42 Target frequently.
- ChromaChecker Backer is strongly recommended - Errors caused by improper backing might be more than ∆E00=2 (tested on Epson Standard Proofing Paper 205)
- The Calibration Standard (ceramic plaque), as well as the optical path, have to be cleaned.
- Keep your instrument on its base - that will charge it
- Be sure that environmental conditions (RHT) are in the recommended range
- When scanning be sure that the instrument is ready for the next step. The beep of the instrument tells that the previous measurement is done, but the instrument will be ready for nest measurement when the display will show grey patches without any numbers.
Related Topics
Contact ChromaChecker Support
Additional information and Support Form is available for logged users.